1. Installing the hardware
1.1 Connecting the mouse
1.1.1 USB version
•
Connect the USB plug of the mouse to the PC
USB socket or a USB hub.
•
Depending on your Windows version, you may be
prompted to insert the Windows Installation CD.
Insert your Windows CD in the CD-ROM drive and
follow the instructions on the screen.
1.1.2 PS/2 version
•
If you have not already done so, shut down your
computer and switch it off*.
•
Connect the PS/2 connector of the mouse
(via the USB-PS/2 adapter) to the PS/2 mouse
connector (green) on the PC.
•
Switch on your computer and boot the system.
*Do not connect PS/2 version mouse when computer is switched on. This can
cause damage to your PC.
•
Smart-Link technology means that the standard functions of the mouse can
be used immediately.
•
The software supplied must be installed to assign specific functions to the
3rd (wheel) button and the additional buttons at the side. (See section 2)
2. Installing the software
• Uninstall any mouse software already installed.
• The software supports Windows 98/2000/ME and XP.
L
L
Insturction Manual
5
Fig.1
Fig.2
00057251bda 26.04.2006 11:54 Uhr Seite 5
