12
13
6.7. Backlight
Note – Backlight
•
If you press the
SNOOZE/LIGHT
button (9), the display will light up for approx. 5 seconds.
6.8. Low battery charge
As soon as the battery symbol
appears on the display of the base station, the capacity of
the batteries in the measuring station is very low. Replace the batteries immediately.
N
ote – Replacing the batteries
•
Note that the stations have to be resynchronised each time after you change the
batteries in the measuring or base station.
•
To do this, remove the batteries from the other station and then reinsert them, or
change them as required.
6.9. Reset
•
If displays/transmissions continually fail to appear or are incorrect, use a pointed object
(paper clip, etc.) to press the
RESET
button (16) on the base station and the
RESET
button
(21) on the measuring station to carry out a restart.
•
The base station returns to the factory settings and all stored information is lost.
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
8. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
9. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
10. Technical Data
Base station
Measuring station
Power supply
3.0 V
2 x AA batteries
3.0 V
2 x AA batteries
Measuring range
Temperature
0°C – +45°C/
32°F – +113°F
-40°C – +70°C/
-40°F – +158°F
Measuring increments
Temperature
0,1°C / °F
0,1°C / °F
Temperature
measurement cycle
60-64 s
60-64 s
Radio-controlled
DCF clock
Yes
No
Radio-controlled
DCF clock
Yes
Yes
Max. number of
measuring stations
3
Frequency
433 MHz
Range
≤ 50 m
