10
11
•
Alternatively, you can press the
ALARM SET
button (10) to display the alarm time (AL).
•
Press the
ALARM SET
button (10) as needed to activate/deactivate the alarm.
•
The alarm symbol (7) will either be displayed or not displayed accordingly.
•
When the alarm is triggered, the alarm symbol (7) begins to flash and an alarm sounds.
•
Press the
ALARM SET
button (10) to stop the alarm. Otherwise, it will stop automatically
after 2 minutes.
N
ote – Snooze function
•
While the alarm is sounding, press the
SNOOZE/LIGHT
button (9) to activate the
snooze function. The alarm symbol (7) begins to flash on the display. The alarm is
stopped for 5 minutes, after which it will sound again.
•
The snooze function can be used over a 24-hour period.
Celsius/Fahrenheit
•
Move the
°C/°F
slide switch (12) to the
°C
or
°F
position to display the
temperature (3,4) in the respective unit.
6.4 Weather forecast
Note – Weather forecast
•
Based on changes in the atmospheric pressure and the data saved, the base station is
able to make weather forecasts for the next 12 to 24 hours.
•
The probability of an accurate weather forecast is around 70–75%.
•
The weather forecast and the current weather are indicated by four different symbols (1):
Symbol (1)
Weather
Sun
Slightly cloudy
Cloudy
Rain
6.5. Maximum and minimum temperature and humidity values
•
The base station automatically stores the maximum and minimum outdoor/indoor
temperature values.
•
Repeatedly press the
MEM–
button (15) to switch between the current temperature,
minimum temperature (MIN) and maximum temperature (MAX).
•
The maximum and minimum values are displayed for 5 seconds.
•
Press and hold the
MEM–
button (15) to reset the stored maximum and minimum values.
6.6. Frost warning
•
If the outdoor temperature (3) is between -2°C and ~ 3°C, the frost warning symbol
appears on the LCD and flashes continuously.
•
The frost warning symbol
disappears once the temperature rises above this range.
