10
7. FM
After pressing [
mode
] repeatedly, activate operating mode
FM
:
[
mode
]
7.1 Scan setting
The search run setting allows you to determine whether
stations with low signal strength are ignored during the
automatic search run.
Proceed as follows:
[
menu
]
Scan setting
•
To have the search run stop only at stations with high
signal strength, select
Strong stations only
. Otherwise,
the search run will stop at every station for which a
signal is received.
7.2 Automatic station search
•
Press and hold [
enter/navigate
] until the automatic
station search starts.
•
The radio stops the search and starts playback when it
finds a station.
•
Press [
enter/navigate
] to continue the search until the
next station is found.
7.3 Manual station search
When you make station settings manually, you can define
the desired frequency yourself and tune into stations that
were ignored during automatic station search because
their signals were too weak.
•
Turn [
enter/navigate
] (left: –0.05 MHz / right: +0.05
MHz) until you see the desired frequency. Wait a moment
until playback of the received station signal begins.
7.4 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
7.4.1 Save favourites
•
Set the station that you would like to save as a favourite
station preset.
•
If the station is received, press and hold [
memory
] on
front of the radio.
[
memory
]
An overview window with the station presets should open
after approx. 2 seconds.
•
You can switch between the station presets (1 to 30) by
turning [
enter/navigate
].
•
Press [
enter/navigate
] to save the station on the
desired station preset.
