Hama 40972, Руководство пользователя

Страница: 10 / 40

RF Connection- for A/V Component without Spare A/V
Output Jacks
If your A/V component has only one set of A/V output jacks, and you want to
use it with a nearby TV, connect coaxial cable from the single OUT port on
the A/V component to the VHF/UHF In port on your TV. In order to also
view cable transmission on that TV, connect your incoming cable TV source
to the single IN port of the A/V component. Please see Fig. 4.
Note 1: On an NTSC system, the connector on the A/V equipment is an
RCA jack. Connect the yellow plug to the jack labeled VIDEO, the red plug
to the jack labeled AUDIO RIGHT and the white plug to the jack labeled
AUDIO LEFT.
Note 2: On a PAL system, connect the Scart connector labeled
TRANSMITTER to the Scart connector labeled OUT on the A/V equipment.
Note 3: If the A/V equipment has only one output for audio (mono sound
only), connect the white plug to that single audio output jack.
Power Supply
1. Plug one end of the provided power adapter into a wall outlet and the
other end into the rear of the transmitter. See Fig. 5.
2. Turn on the transmitter. The LED on the front of the unit should light up.
Setting up the Receiver
Connect the Receiver to a TV
A/V Connection - for TV with A/V Input Jacks
Connect the mini-plug of the provided A/V cables to the A/V jack on the
rear of the receiver; connect the other end of the cable to the A/V jacks (or
Scart connector) of the TV labeled LINE IN. See Fig. 6.
RF Connection - for TV without A/V Input Jacks
If there is no A/V input jacks on your TV, you will need to get an RF
modulator (available at your local electronic store) to make the connection
between TV and receiver. See Fig. 7.
Connection through an A/V Component
If an A/V component (VCR, DVD player, DBS receiver etc.) is connected to
the TV already, you can just connect the receiver to the free LINE IN jacks
on the A/V component. See Fig. 8.
Note 1: On an NTSC system, the connector on the TV is an RCA jack.
Connect the yellow plug to the jack labeled VIDEO, the red plug to the jack
labeled AUDIO RIGHT and the white plug to the jack labeled AUDIO LEFT.
Note 2: On a PAL system, connect the Scart connector labeled
TRANSMITTER to the Scart connector labeled IN on the TV.
1
.2
2
2
.1
2