What You Get
One Transmitter
One Receiver
One Infra-red (IR) eye
Two A/V (Audio/Video) Cables (mini-RCA or mini-Scart)
Two Power Adapters
This User's Manual
Note:
The transmitter and receiver look very alike. You can find
"Transmitter" and "Receiver" on the top of the units. See Fig. 1.
Product Layout
Transmitter/Receiver (Fig. 2)
1.
IR Antenna
2.
Power Indicator/IR Window
3.
Power Adapter Plug
4.
ON/OFF Switch
5.
A/V Jack
6.
Channel Selection Switch (Select the channel by sliding the slide switch to the
channel number you want.
Note:
Must select the same channel both on
transmitter and receiver)
7.
IR Eye Plug
Setting up
Before you make the connection:
Set the channel switches on the back of the transmitter and receiver to the same
channel.
Depending on the type of TV you own and the component A/V system (VCR,
DVD player, etc.), connection methods will be different. We recommend you
refer to the connected A/V component's user's manual for details, then make
connections according to the following steps.
Setting up the Transmitter
Connect the Transmitter to an A/V Component
A/V Connection
Connect the mini plug of the provided A/V cables to the A/V jack on the rear
of the transmitter; connect the other end of the cable to the A/V jacks (or
Scart connector) of the A/V component labeled LINE OUT. See Fig. 3.
1
1
.1
ENGLISH
1
Содержание 40972
Страница 2: ......
Страница 8: ......
Страница 39: ......
Страница 40: ...November 2005 P N 408 000352 00 ...