11
•
Choose whether the pictures from
the
Save2Data
(microSD card) or
your
terminal device should be shown.
•
Select
in the top-right corner of
the display
•
Use the circle at the left edge of the display to
select the picture(s) that you wish to transfer. On
successful selection, the circle turns red with a
white check mark
•
To select all pictures at once, tap
Select all
at
the top-left corner of the display.
•
Aside from the options to copy and move, the
context menu at the bottom edge of the display
also provides other options.
•
Delete:
Deletes the selected file(s) from the
storage location.
•
Share:
Opens the context menu of the
terminal device.
•
More:
The
Rename
option is displayed. This
option is only available for storage locations
on the
Save2Data mini
(microSD card) and
with a single file selected. Enter a new file
name and confirm with
OK.
Note – Additional option
•
The
New folder
and
Rename
options
are only available in the storage of the
Save2Data mini
(microSD card).
•
Since the procedures for these additional
options are identical for videos, documents,
etc., the corresponding sections of these
instructions refer to this section.
6.2 Playback and transfer of videos
6.2.1 Playback of videos
•
Videos
•
By default, the videos stored on the
Save2Data
mini
(microSD card) are displayed.
•
Choose whether the video from
the
Save2Data
(microSD card) or
your
terminal device should be play.
•
Tap the video which is to be played.
•
The video is displayed in playback mode and
playback begins automatically.
•
Various options are available.
•
Switch between full-screen and window modes
•
Play the previous video
•
/
Start/pause playback
•
Play the next video
