8
9
Package contents:
1 x DVB-T USB 2.0 Stick
1 x software CD-ROM
1 x aerial converter
1 x passive DVB-T aerial
1 x remote control
1 x printed quick guide
System requirements:
CPU: 1.5 Ghz or above
Main memory: at least 256MB RAM
Graphics: DirectX 9.0 compatible with min. 64 MB local memory
Sound: compatible with AC97
Hard drive: min 1 GB of spare memory
One spare USB 2.0 socket
Microsoft DirectX 9.0c or higher
Operating system: Windows® 2000 with Service Pack 4 or Windows® XP with Service Pack 2.
Other requirements:
In order to receive DVB-T signals, you must ensure that your region is suffi ciently covered by the DVB
network. In borderline areas, the enclosed DVB-T rod antenna may not be suffi cient to allow perfect
reception. If this is the case, we recommend that you use a roof antenna, if available, or an active DVB-T
antenna with an integrated amplifi er. If you require more information on DVB-T coverage in Germany, visit the
www.ueberallfernsehen.de website. This page allows you to check the DVB-T coverage in your area via post
code (in Germany).
Installing the Hardware:
Note for notebook users:
Notebook users should take particular care to ensure that their graphic card is powerful enough to play
DVB-T programmes. This is particularly relevant for graphic cards without discrete memory.
Attach the aerial converter to the DVB-T USB stick, and then connect the passive DVB-T aerial
provided to the aerial converter.
Insert the DVB-T USB 2.0 stick into an available USB 2.0 socket. If you want to use the remote control
provided, ensure that there is a direct line-of-sight connection between it and the receiver. If necessary,
use a USB extension cable.
Installing the WDM driver on Windows
®
XP with Service Pack 2:
Note
: This driver is essential for use with the enclosed software!!!
1. If Windows XP prompts you to establish an internet connection to Windows Update after you connect
the
Hama DVB-T USB 2.0 stick
to the computer, select
No, not this time
. Click
Next
to continue.
2. In the next window, you are asked
“What do you want Windows to do?”
. Select the option
“Install software from a list or particular source (for advanced users)”
. Click
“Next”
to continue.
3. Insert the enclosed driver CD-ROM in your drive. Click the
“Browse”
button and select your CD-ROM
drive which contains the CD-ROM you have just inserted. Select the
\DTV_Driver
directory. Then click
>
Next
. If a message stating that the driver
did not pass the Windows
®
Logo Test
is displayed, select
„Continue installation”
and then click >
Finish
.
4. The
Found New Hardware Wizard
then opens again and asks if you want to connect to
Windows
®
Update
. Click
„No, not this time”
followed by >
Next
.
5. In the next window, you are asked
“What do you want Windows to do?”
. Select the option
“Install software from a list or particular source (for advanced users)”
. Click “
Next
” to continue.
6. Click the
“Browse”
button and select your CD-ROM drive which contains the CD-ROM you have just
inserted. Select the
\DTV_Driver
directory >
Next
. If a message stating that the driver
did not pass the
Windows
®
Logo Test
is displayed, select
„Continue installation”
and then click >
Finish
.
7. Save all open documents and close all other programs and restart your system. Driver installation is
now complete.
Checking the WDM driver installation in Windows
®
XP:
You can check whether Windows® XP connected the
Hama DVB-T USB 2.0 receiver
to the system successfully
using the
device manager
. In order to do this, click on ->
Start -> Control Panel (in the traditional start menu,
-> Start -> Settings -> Control Panel) -> Printer and Other Hardware
and then on
System
under
See also
(in
the traditional view double click system). In the
System Properties
window, select ->
Hardware -> Device
Manager
. In the
Audio, video and games controller
section, the
„Digital TV Receiver”
entry must be displayed
without a yellow exclamation point.
Installing the BDA driver on Windows
®
XP with Service Pack 2:
Caution!
This driver only functions with programs which support Microsoft’s BDA driver architecture! This
BDA driver does not function with the software enclosed with the stick. You must also ensure that you remove
the old software and its WDM driver completely before you start to install the BDA driver!!
Proceed as follows:
1. If Windows® XP prompts you to establish an internet connection to Windows® Update after you
connect the
Hama DVB-T USB 2.0 stick
to the computer, select
No, not this time
. Click >
Next
to
continue.
2. In the next window, you are asked
“What do you want Windows to do?”
. Select the option
“Install software from a list or particular source (for advanced users)”
. Click
“Next”
to continue.
3. Insert the enclosed driver CD-ROM in your drive. Click the
“Browse”
button and select your CD-ROM
drive which contains the CD-ROM you have just inserted. Select the
\BDA_Driver
directory. Then click
>
Next
. If a message stating that the driver
did not pass the Windows
®
Logo Test
is displayed, select
„Continue installation”
and then click >
Finish
.
4. The
Found New Hardware Wizard
then opens again and asks if you want to connect to
Windows
®
Update
. Click
„No, not this time”
followed by ->
Next
.
L
Instructions for DVB-T USB 2.0 Stick