28
14. Bluetooth
®
You can pair your terminal device with the radio using
Bluetooth and use it as a playback device. You can control
playback directly on the terminal device. You can adjust the
volume on the radio, as well.
Note – Bluetooth
®
•
Check whether your mobile device (smartphone, tablet
PC. etc.) is Bluetooth
®
capable.
•
Note that the maximum range for Bluetooth
®
is 10
metres without obstacles such as walls, people, etc.
•
The Bluetooth
®
connection may be disrupted by other
Bluetooth
®
devices/ connections in the vicinity.
•
It is only possible to connect the radio to one terminal
device.
•
Note that compatibility depends on the supported
Bluetooth
®
profiles as well as the Bluetooth
®
versions
being used. (see Technical Data, operating instructions
of the terminal device in use)
After pressing [
MODE
] repeatedly, activate operating
mode Bluetooth
®
:
[
MODE
]
Alternatively, press [
BT
] (29) on the remote control to
switch directly to this operating mode.
14.1 BIuetooth
®
pairing
•
Make sure that your Bluetooth capable terminal device is
on and Bluetooth
®
is activated.
•
Enable Bluetooth
®
operating mode on the radio by
repeatedly pressing [
MODE
]:
[
MODE
]
•
Open the Bluetooth
®
settings on your terminal device
and wait until
DIT2100MSBT
appears in the list of
Bluetooth
®
devices found.
•
If necessary, start searching for Bluetooth
®
devices on
your terminal device.
•
Select
DIT2100MSBT
and wait until the radio is listed
as connected in the Bluetooth
®
settings on your terminal
device.
•
Your terminal device is also shown as connected on the
radio display.
•
Start and control audio playback using the controls of the
terminal device.
Note – Bluetooth
®
password
Some terminal devices require a password in order to
connect to another Bluetooth device.
•
If your terminal device requests a password for
connection to the radio, enter
0000
.
14.2 Automatic Bluetooth
®
connection (after
successful pairing)
•
Terminal devices already paired with the radio are
automatically saved on the radio.
Note – Connection impaired
After the radio and terminal device have been paired,
a connection is established automatically. If the
Bluetooth
®
connection is not established automatically,
check the following:
•
Check the Bluetooth
®
settings of your terminal device
to see whether
DIT2100MSBT
is connected. If not,
repeat the steps listed under Bluetooth
®
pairing.
•
Check whether your terminal device and the radio are
less than 10 metres apart. If not, move them closer
togehter.
•
Check whether obstacles are impairing the range. If
so, move the devices closer together.
14.3 Terminate Bluetooth
®
connection
[ ]
Main menu
Terminate connection
•
Then select the
YES
button by turning [
navigation
],
and confirm termination of the Bluetooth connection by
pressing [
navigation
].