Ham STAMPFL RF SHARK, Инструкция по сборке

Страница: 21 / 53

1
2
3
4
FUNCTIONAL TEST: 13
The LO signal can be checked at the SMB socket under the display. Approx. 500
mV. The reference signal of 30 MHz of the TCXO can be checked at the standing
SMB socket. IF ERROR SEE PAGE 14.
Check the MODE button
When the button is pressed again, all modulations appear one after the other.
AMN / AMW / LSB / USB / CW
Encoder installation and control
Note wire colors. See detailed photos.
Frequency increases clockwise.
Check the MEMO RY button
When you press the memory button, all settings are saved until you switch on again.
Check the ATT ENUATOR button
Lights up red when active.