Name of the
service
Service contents
Customer’s responsibilities
Testing
Halton tests the system’s
operation, inspects the fire
dampers and smoke detectors
on-site to verify their correct
operation, and supplies
a test report.
The Client does wiring of
the system and assigns
addresses for tthe fire and
smoke dampers. All wirings
should be done and the system
should be operational before testing.
Commissioning
Commissioning includes
programming of the functions
and indication of the addresses
for the fire dampers.
Also includes
the Testing package
The Client does wiring of the system
and assigns addresses for the fire
and smoke detectors.
All wirings should be done and
the system should be operational
before commissioning..
System wiring
(24V)
Halton does wiring between
the central system and other
system components .
This is additional service to
the Commissioning package
(Package 2).
The Client connects the power
cable, attaches Halton Link
according to the designs and
does wiring for the system
components
Damper
locations
Halton programs fire damper
location drawings
(By floor/by vertical shafts)
to the central system.
This is additional service to
the Commissioning package
(Package 2).
The Client supplies the final
design documents
Repairs
Upon request, Halton rectifies
the faults and deficiencies
found during the inspection.
The Client commits in advance to
compensating for the extra work
caused by the repairs. Optionally,
Halton provides the customer with
an error report, with repair work
subject to separate negotiations.
In practice, this results in a higher
price
Specification
The Halton Safe management system
for 200 fire dampers and 200 smoke detectors.
The central unit for Halton Safe HSM can be modularly extended with Halton Safe Link control
units, to which the fire dampers and smoke detectors are connected. Communication protocol
11
