Haltech HAL-HPC300, Руководство по эксплуатации

Страница: 25 / 30

25
Features
•
Print technology
：
Direct thermal
•
Paper width
：
58mm
•
Print zone Widt: 48mm
•
Resolution: 8 dots/mm(203dpi)
•
Dots per row: 384 dots
•
Print speed: 50mm/s(MAX)
•
Paper thickness ： 60 ～ 80µm
•
Print contents: GB2312 characters, ASC characters Ⅱ
，
barcode CODE39
、
EAN13
、
ITF, graphics
•
Dimension: 90 x 76 x 36 mm
•
Paper roll diameter: ≤ 30 mm
•
Weight
：
220g
（
Excluding paper roll
）
•
Interface
：
Serial
•
Power supply: 650mAh Ni-MH rechargeable battery (AC adapter for recharging
the battery only)
•
Battery charge time: Fast charging (1 ～ 5 hours to full level)
•
Time to use: 20-40 m paper length assuming 25
％
print density or 10 days
sleep mode.
•
Operating temperature ： 5 ℃ ～ 45 ℃
•
Operating humidity
：
20%
～
85% RH
•
Storage temperature
：
-20
℃ ～
70
℃
•
Storage humidity
：
5%
～
95% RH
Power Lever Warning:
Power LED turns red when the battery below the normal
usage level.
Auto-sleep mode:
The printer goes to sleep mode after 10 seconds if no printing
command is received. The printer will go to working mode if the new command is
received.
Turn on/off:
hold the power button for 2 second to turn on or off the printer
Self-check:
When the printer is off, push the power button and hold for longer time
even though the printer turns on and the printer will print settings and status report
Manual paper feeding: Push the function button to manual feed the paper and push
the function button again to stop paper feeding. The maximum paper feeding time is 5
seconds if no function button is pushed.
Printer Status Indication
Steady green Printer is turned on and
ready to use
Flash red (long red and
short dark) Battery in charge
Power LED
Flash green (long green
and short dark) Battery is fully charged or
no battery installed