Haltech HAL-HPC300, Руководство по эксплуатации

Страница: 20 / 30

20
This function will allow the user to have option to save each sample data. The setting
options are: Off, Average Only, Every Sample. The user has the option of saving every
sample, saving an average of a set of samples or not saving any sample data. If the
setting is set to “Off”, no data will be saved for viewing in the Browsing window.
The maximum storage capacity is 1000 set or total of 3000 size data. When the
instrument saved data reaches at the maximum capacity, the instrument will delete the
first (the earliest) set of data set and save the new set of the data to the last record.
Meanwhile, the record number will be automatically updated as an increment.
TimeDelay (start/interval)
The user has the option of setting a
start
time delay which is the period of time between
pressing the
RUN
keypad and the beginning of the actual sample measurement. The
user also has the option of setting a time
interval
between two consecutive sample runs
when the Count Mode (see below) is set to be more than one. These auto-start and
auto-repeat functions allow the user to move away from the instrument so not to interfere
with the environment that the instrument is sampling. The maximum start time delay and
the maximum delay time between each sample run are 59 minutes and 59 seconds.
CountMode
This function gives the user the ability to set a number of repeated measurements after
pressing
RUN
each time. The maximum of repeated sample times that can be set are
99.
Alarm
The user may set the instrument to alarm the count limit based on either the Federal
209E or ISO standard. With the 209E standard option the user may set as class 1, 10,
100, 1000, 10000, 100000. With the ISO standard option the instrument may be set to
alarm between classes 2 to 9.
Location