halstrup-walcher PSE2DN Series, Инструкция по эксплуатации

Страница: 10 / 32

Instruction Manual PSE2xxDN
10
Name
Attr.
No. Function Range of
value Back
up Delivery
State R/W
maximum
start-up
torque 24 value in cNm see table
16 bit yes see
table R/W
time period
for start-up
torque 25 value in msec 10...1000
16 bit yes 200 R/W
rpm limit for
aborting run 26 value in % of the target rpm 10...90
16 bit yes 30 R/W
time elapsed
until speed
falls below
rpm limit for
aborting run 27 value in msec 50...500
16 bit yes 200 R/W
length of loop 31 minimum number of increments which the
drive moves in a pre-defined direction
when approaching a target position
value in increments (value = 0

no loop)
0.025…1
rotations
(10…400
at del.
state) or
0
32 bit
yes 250 R/W
maximum
rpm, counter-
clockwise 32 value in rpm see table
16 bit yes see
table R/W
maximum
rpm,
clockwise 33 value in rpm see table
16 bit yes see
table R/W
step width for
single step 34 number of increments when activating a
jog run bit for a short-time 1...100
16 bit yes 1 R/W
idle period for
manual run 35 Span of time which a jog run bit must be
activated in order to begin a manual run
value in steps of 5 msec 20...2000
16 bit yes 200 R/W