PSx3xxDP Instruction Manual
9
4.3
Pin assignment
For the supply voltage either a Binder series 713/763 (A-coded) round, 5-pin plug for PSE
and PSS devices or a 5-pin Harting plug with protective sleeve (HAN4A) for the PSE34xx
devices is located in the housing cover of the PSx3xxDP.
A series 715 (B-coded) 5-pin round socket and 5-pin plug are provided for connecting the
bus
A Binder series 718 4-pin plug is used to connect the jog keys (optional).
Supply voltage connector:
Profibus DP connector (B encoded)
(external top view)
(external top view)
Binder 713/763 Harting(PSE34xxDP)
1
+24VDC (final stage)
1 VP +5V
2
ground (final stage)
2 RxD/TxD
–N / A cable
3
+24VDC (control unit)
3 DGND (reference potential to VP)
4
ground (control unit)
4 RxD/TxD
–P / B line
5
housing/pressure balance
5 shield
To prevent the ingression of fluids into the PSW-housing during
cooldown, use a special cable with an airtube for pressure
balancing of your PSW.
Optional connectors
Connector for external keyboard )
4-pin Binder 718 connector
(External top view)
1
bn
+24V(from control unit)
2
ws
forward key
3
bl
reverse key
4
sw
GND(from control unit)
Electrical grounding
Next to the connecting plugs there is a M4 stud bolt. It is recommended to connect the
positioning system with a cable as short as possible to the machine base. The minimum
wire cross section therefor is 1.5mm².
Содержание PS*3**DP series
Страница 31: ...PSx3xxDP Instruction Manual 31...