97095C (Rev. E - 10/99)
PAGE 5
RC8*C RC12*C AND 14762 & 14700 CUP DISPENSER
INSTALLATION INSTRUCTIONS
FOR THE
RC CUP DISPENSER OPTION
MODELS: 14762
1. Open door of cup dispenser and remove waste bin.
2. Shim along the bottom and side of cup dispenser as reguired to
obtain a good alignment with previously installed drinking fountain.
Be sure to check for proper operation of access door before
securing unit in place. Securing can be done through slots
provided using screws or bolts (as required by wall construction).
3. Replace waste bin.
FIG. 9
FIG. 10
PLUMBING ROUGH-IN
CUP DISPENSER WITH GLASS FILLER
* NOTE If wall opening height has been adjusted
to meet local codes (see Step No. 1 of installa-
tion instructions), height dimensions must be
adjusted accordingly.
