Page 8
HAC-HB*1B HAC-HB-NF-*1B
1000001732 (Rev. D - 06/16)
RE-PLUMBING TWO LEVEL STATION WATER CIRCUITS (NON-FILTER)
CAUTION:
•
This procedure MUST be performed on ALL TWO LEVEL HALSEY TAYLOR WATER COOLERS or the bottle
filling unit
WILL NOT perform properly!
•
When disconnecting water lines use a container to catch any water running out of the lines.
1) Add water supply to Bottle Filler:
•
In the left hand unit, cut the Evaporator Outlet 1/4” poly tubing 5” from the access opening between the units
and insert the 1/4” Tee fitting between the two pieces.
Fig. 4
HAC TWO LEVEL HYDROBOOST PLUMBING
STANDARD HAC TWO LEVEL PLUMBING
TO BUBBLER
REGULATOR
EVAPORATOR
INLET
EVAPORATOR
TO BUBBLER
EVAPORATOR
OUTLET
TEE
5”
TO BOTTLE
FILLER
IN-LINE STRAINER
L.H. DUMMY UNIT
L.H. DUMMY UNIT
R.H. REFRIGERATED UNIT
R.H. REFRIGERATED UNIT
TO BUBBLER
REGULATOR
IN-LINE STRAINER
EVAPORATOR
INLET
TO BUBBLER
REGULATOR
EVAPORATOR
OUTLET
EVAPORATOR
REGULATOR
Buy at
| 855-558-9600 | BottleFillingStations.com
