Halma Ocean Optics LASER-785-IP-LAB, Инструкция по установке и эксплуатации

Страница: 3 / 22

Important Safety Notices
The Class IIIB laser described here produces a laser emission of 785 nm with output power levels
exceeding 350 mW. All models except the –S are designed to be used in a fiber-coupled configuration (-S
is designed for SMA coupling); any other configuration may expose the user to hazardous radiation.
This laser is safe to operate, provided the user pays attention to all safety warnings:
1. Post warnings in the area of the laser beam to alert those present.
2. Keep all unauthorized personnel out of the area where the laser is operated to avoid potentially
hazardous exposure to eyes and skin.
3. Whenever the laser is running and the beam is not in use, it is good operating practice to
mechanically block the path.
4. Never look directly into the laser source or scattering laser light from any reflective surface.
Never sight down the beam into the source.
5. Maintain experimental setup at low heights to prevent inadvertent beam-eye contact.
6. As a precaution against accidental exposures to the output beam or its reflection, operators should
wear laser safety glasses attenuated to the wavelength being generated.
LASER-785-LAB-02-0409 A