X X X X
More
>Diagnostics
Más
>Diagnóstico
75.0047.01 LZR-WIDESCAN Mechanical Installation 20210726
Page 12 of 12
Select your
Language
before entering the first
LCD menu.
Within the first 30 seconds of power-on of the sensor
or later in the diagnostics menu.
Enter a
Password
if necessary.
Access advanced adjustments.
Displayed value = Saved value
Displayed value = Factory value
Go to the
Diagnostics
menu.
Enter the LCD menu.
Select a folder, parameter, or value.
Confirm a value and exit edit mode.
Activate red spots
on floor.
Launch POSITION
WIZARD.
PRESS
2X
SHORT
PRESS
LONG
PRESS
FORMER HARNESSES
COM
NO
NC
TEST
POWER
OUTPUT 2
OUTPUT 1
RELAY
COM
NO
NC
TEST
POWER
OUTPUT 2
OUTPUT 1
RELAY
Previous EU harness
Previous US harness
HOW TO USE THE REMOTE CONTROL
After unlocking, the
red LED flashes and the
sensor can be adjusted by
remote control.
To end an adjustment session,
always lock the sensor.
If the red LED flashes quickly after unlocking, enter an
access code from 1 to 4 digits. If you do not know the
access code,
cycle power
.
To save an access code via the remote control:
To delete an access code via the remote control:
Enter the existing code
If the access code is unknown, cycle power to delete the existing access code.
HOW TO USE THE LCD
Password
Value
Parameter
Parameter
>Diagnostic
Value
More
