Quick Start Guide
January 2023
•
Rev. 0
• Standard Devices User Manual
6
Quick Start Guide
Setup
• Connect your device.
Ensure that
flow passes through your device in
the same direction as the arrow on
the flow body (usually left to right).
Application setup examples can be
found in Appendix C (
• Choose your engineering units.
You
can choose the measurement units
by selecting
MAIN MENU
→
SETUP
→
Sensor
→
Engineering Units
.
See
for more details.
Operation: Flow Verification
• Monitor live flow, temperature,
and pressure readings.
Readings
are updated and displayed on your
device in real time. See
.
• Capture totalized readings.
The
totalizer option displays the total flow
that has passed through the device since
the last time the totalizer was reset.
To enable the totalizers, press
MENU
→
SETUP
→
Sensor
→
Totalizer 1
or
Totalizer 2
. See
.
Connectors and Buttons
The drawing to the right represents a typical
configuration of a standard controller.
Your
device's appearance and connections may
differ.
Backlight
The monochrome display comes equipped
with a backlight.
To toggle the backlight
power, press the logo on the front of your
device.
For optional color TFT displays, pressing this
button turns off the display to conserve power.
See
.
Maintenance and Care
•
Gas devices do not require cleaning
when flowing clean, dry gases. Liquid
devices require minimal cleaning when
flowing clean liquids (
•
Calibrate your device annually.
To schedule a calibration, please
contact support (
+0.0
+0.0
+13.49 +22.73
Mass Flow
CCM
SCCM
MENU
PSIA
¤C
SETPT
+0.0
SCCM
A ir
Process
Connections
Mounting
Holes
Light
Switch
Softkey
Buttons
LCD
Display
I/O PORT
DC
IN
This MC-1SLPM-D model mass
flow controller is a typical unit.
The flow body and the valve
sizes can vary significantly.
