Data Screens
January 2023
•
Rev. 0
• Standard Devices User Manual
14
Data Screens
Depending on the device, there can be up to four screens providing different information based on your needs. Further settings
for the data screens can be found on
Live Screen
The
live screen
is the default data screen of the device. This
provides access to the different measurements that a device
may be taking. For more information, see the
Viewing Live
Data
section under the
Basic Operations
on
.
Min/Max Screen
MENU
→
SETUP
→
Display
→
Data
Screens
→
Min/Max Screen
The
Min/Max screen
displays the current selected
measurement value as well as the minimum and maximum
measurement of that value since the last reset. To enable the
screen, change the option from
Hide
to
Show.
On the
Min/Max Screen screen
are four options:
•
RESET
erases the current measured minimum
and maximum and returns them to zero.
•
SHOW VALUE
provides possible measurements
to display on the screen, along with their
minimum and maximum values.
•
SETPT
is only available on controllers. It displays
the current setpoint. Press to set or clear a setpoint.
See
for setpoint instructions.
•
NEXT
moves to the totalizer screen (if enabled)
or
MENU
opens the device menu.
Totalizer Screens
Flow Devices
MENU
→
SETUP
→
Sensor
→
Totalizer
→
Totalizer 1
or
Totalizer 2
Mass flow and liquid devices have optional totalizers that
can be configured on the device. To enable the totalizer
and configure its settings, see
. The Totalizer
displays the total amount of mass or volume that has flowed
through the instrument since its last reset. It also enables
batch dispensing for controllers (
).
•
M AVG
or
V AVG
shows totalizer averaging, which
displays average flow rate since last reset, updated live.
•
SLPM
(or another measurement of mass flow) displays
the live flow rate. Press to change engineering units.
•
SETPT
displays the current setpoint on controllers.
Press to set or clear a setpoint (
•
PEAK
displays the peak flow rate
since the last totalizer reset.
•
BATCH
selects the quantity to be dispensed
in each batch.
-NONE-
appears if the batch
mode is off. Only available on controllers.
•
RESET
clears all totalized data and immediately
resets the timer to
0
. Starts a new batch immediately,
if the controller has a non-zero setpoint.
•
MENU
enters the
main menu
.
•
NEXT
moves to the second totalizer (if enabled).
Live screen
Min/Max screen.
Totalizer displaying a mass flow
average without a batch.
