Halma Alicat Scientific EXTSEN, Руководство по эксплуатации

Страница: 18 / 50

18 Navigation and Customization
Control Menus
The
CONTROL
and
ADV CONTROL
menus
allow you to command new setpoints,
change the setpoint control loop,
and adjust proportional, integral, and
derivative (PID) control settings, among
other options.
Menu
→
Control
•
SETPT RAMP
activates and
sets the speed of setpoint
ramping ( page 22 ).
•
SETPT
displays the current
setpoint. Press to command
a new setpoint or clear the
existing one. Setpoints are
not editable via the front panel if the source is analog.
•
BACK
returns to the Main Menu selection (previous page).
•
ADV CONTROL
moves to the Advanced Control menu (below).
•
MAIN
exits to the Main Display ( page 7 ).
Menu
→
Control
→
Advanced Control
•
SETPT SOURCE
selects setpoint
input from either serial data and
the front panel, or analog sources.
•
LOOP SETUP
selects the type of
closed loop control and adjusts
PID settings ( page 24 ).
•
BACK
returns to the Control
Menu (above).
•
CONTROL OPTS
sets options
for setpoint ramping and
limits for pressure control
(starting page 19 ).
•
MAIN
exits to the Main
Display ( page 7 ).
Control Menu
Advanced Control Menu