14
User’s Manual
14
Miscellaneous
FP Unlocked/Locked
The FP Unlocked/Locked control shows the device front
panel lock status. Factory default is Unlocked.
When UNLOCKED, the device front panel buttons are active.
When LOCKED, the device front panel buttons are NOT active. RS232,
webpage and telnet commands are always active even when the FP is in
the LOCKED state.
UHBX-SW3-WP/S
The UHBX-SW3-WP/S control setting shows the device
current setting as well as being able to control the ON and
OFF states.
Factory default is ON
When OFF, no special processing of the HDBT RS232 is done.
When ON, the device will send and receive RS232 commands to/from the
installed UHBX-SW3-WP/S for control.
IR Sender/Receiver
The IR Sender/Receiver control shows the device current
setting as well as being able to control the IR Receiver or IR
Sender States.
Factory default is IR Receiver
When set to IR Receiver, ANY IR Signals sensed are sent to the HDBT TX
for IR output. (compatible with Model CIR-DET-P2)
When set to IR Sender, ANY IR Signals received from the HDBT TX device
OR the UHBX-SW3-WP/S (if installed) OR the X21-UI (if installed) is
transmitted from the 3.5mm IR output on the device rear panel. (Compatible
with Model CIR-EMT or CIR-KIT-EMT2)
