12
User’s Manual
12
2.8. Communications
Tab
Serial Configuration
Baud
The Baud controls show the device baud rate
setting for the available serial ports.
Factory default is 9600 for Serial Port #2
Factory default is 19200 for the X21-UI serial port (when installed)
Parity
The Parity controls show the device parity setting for the available serial ports.
Factory default is NONE for Serial Port #2
Factory default is NONE for the X21-UI serial port (when installed)
Pass-Thru
The Pass-Thru control shows the device RS232 Pass-
Thru state as well as being able to control the ON or
OFF state. Factory default is OFF.
The available serial ports can be either the Serial Port #1 on rear of device, the
X21-UI serial port (when installed) or the HDBT TX serial port (when available).
When ON, RS232 characters received from any of the serial ports are
‘Passed thru’ to Serial port #2 unchanged.
When OFF, RS232 characters received on any of the serial ports are NOT
‘Passed thru’ to Serial port #2.
