HALE SAM, Быстрый старт, Страница: 9 / 14

9 FOR MORE INFO REFERENCE OIM MANUAL P/N FSG–MNL–00210
9. Commissioning
ALWAYS STOP THE ENGINE, SET THE PARKING BRAKE, AND CHOCK THE WHEELS BEFORE GOING UNDER THE
TRUCK FOR ANY REASON.
Verify required SAM equipment is present and correctly interconnected.
❑
Operate all intake valves from the manual valve control screen.
❑
Operate all discharge valves form the manual valve control
❑
Operate tank fill and tank to pump from SAM pump controller
❑
Verify no errors or missing information on the “pump info” screen on the SAM pump controller
❑
Verify the SAM Pump controller doesn’t cycle power (Baud rate check) when truck is on.
❑
Verify required ITL-40 (water tank level indicator) is present
❑
Verify SAM system (red tubing) is connected to vehicle air
❑
Verify SAM system water column sensor hose (10 feet of 3/4-in flex tubing provided) is connected to vehicle
(Refer to Technical Manual [FSG–MNL-00211].)
❑
Verify SAM system interlock wiring is connected to vehicle.
❑
Shift into pump gear and 4
th
gear lockup. Verify no SIGNAL LOST/COMM LOSS messages are displayed (or
popped up) on the SAM Control Center. Verify that the system goes into AUTO mode
Verify optional SAM equipment, if specified, is present and correctly interconnected.
❑
Verify that if optional Navigator Pro(s) are specified, that they are present, labeled, are plugged into the
Green CAN network, and operate the associated valve.
❑
Verify that if the optional wireless range extender and DC-to-DC converter (converts 12 VDC to 24 VDC) is
specified, that they are present and connected to a 12 VDC SAM power source.
❑
Verify that if the optional ruggedized tablet is specified, that it is present and configured with a secured wi-fi
connection.