HALE SAM, Быстрый старт, Страница: 7 / 14

7 FOR MORE INFO REFERENCE OIM MANUAL P/N FSG–MNL–00210
5. Compressed Air Requirements

5.1 The OEM/apparatus builder shall supply dry compressed air with a minimum of 75 psi, a maxi-mum of
150 psi. (Typically, from the vehicle air brake system which is typically capable of the 90 psi to 150 psi at
approximately 13 cfm at 1250 rpm.) The pump kit or module provides a loose coil of hose to connect the
OEM/apparatus builder supplied air. See Figure 53. The air supply should include a protection valve as
required by DOT standards.
Connect to Truck Air Tag
6. Plumbing Connections

6.1 Water Column tubing.
A Coil of 3/4-in tubing (loose or pre-connected at SAM end) SAM end connects to fitting on the SAM Drain
Manifold Assy. Plumb to top of onboard water tank fill tower (above the overflow level–in atmosphere)
Labeled as “PLUMB TO TOP OF TANK”
Note: At the onboard water tank access/fill tower, route the 3/4-in flex line to prevent (to maximum extent
possible) incidental items (bags of oil dry, spare supply containers, etc.) from being placed on the tubing and
damaging/breaking it.

6.2 Tank Valves
Connect tank-to-pump and tank fill valves to the apparatus on board tank.

6.3 Connect Drains as labeled. No connection needed on those labeled “to atmosphere”.