2 Safety
2.5 Special danger warnings / residual dangers
24
2.5.15
Hazards due to Cleaning liquids (containing solvents) and
other chemical substances or emissions
WARNING
On the Positioning clamping pin there are dangers due to Cleaning
liquids (containing solvents) and other chemical substances or
emissions!
A failure to observe this can result in death or serious injury!
–
Observe the safety regulations applicable to the product when handling
Cleaning liquids (containing solvents) and other chemical substances or
emissions.
–
During use or at work always wear the protective equipment required for
the work in question (respiratory protection, protective clothing, safety
goggles, and protective gloves).
–
After inhalation: Notify a doctor or poisoning treatment centre
immediately. Remove affected persons to fresh air. Seek medical
attention if signs/symptoms persist. Keep affected persons warm and
calm. If unconscious, apply stable lateral position and seek medical
advice. Keep the airways clear. Initiate artificial respiration in case of
irregular breathing or respiratory arrest.
–
After skin contact: Remove soiled, soaked clothing and shoes
immediately. Wash the skin immediately with soap and plenty of water.
Seek medical attention immediately if irritation persists. Wash soiled
clothing before reuse. Clean shoes thoroughly before reuse.
–
After eye contact: Immediately flush eyes with plenty of water for at least
10 minutes, including under the eyelids. Seek medical advice.
–
After swallowing: Take the affected person out into the fresh air.
If swallowed: Seek medical attention immediately. Keep the airways
clear. Do not induce vomiting. Rinse the mouth with water. Aspiration
hazard if swallowed - may enter and damage lungs.
–
Please note that some auxiliary and operating materials are flammable,
hazardous to health and dangerous.
