48
03-7182-01.fm
Operation
3 Operation
3.1
Instruction
Instruction is required before the first start-up. The first-time instruction of the
machine must be provided only by a specialist of your authorised Hako dealer.
This person will be notified immediately after delivery of the machine from the
factory and will contact you to make an instruction appointment.
3.2
Before putting into service
3.3
Check list: Before machine start-up
Attention
• Before initially starting up the machine, charge the used batteries
fully and appropriately with commissioning charge. Please
observe the instruction manual of the charging device and the
instruction manual of the battery manufacturer. Hako assumes no
liability for battery damage resulting from insufficient commis-
sioning charge.
• Check the machine for operating safety before every start-up!
Eliminate faults immediately.
• Before starting work, the operator must familiarize himself with all
equipment, operating and actuating elements as well as with their
function.
Description
1 Checking the parking area for signs of leaks. Cables and tanks must not
show any sign of leaks or damage.
2 Mounting the brushes and squeegee, see chapter Maintenance.
3 Adjusting the driver's seat, if necessary, see section 3.3.1.
4 Adjusting the side mirror (optional), see section 3.3.2.
5 Checking the battery charge and recharge it as required, see section 5.2.2.
6 Emptying the waste water tank and clean it as required, see section 5.4.
7 Filling the solution tank (see chapter Maintenance) and add detergent
according to the manufacturer's specifications.
