03-7182-01.fm
59
Operation
3.5
Loading and transporting
Loading
When loading the machine, observe its weight, see Section 4
Transporting
When transported on a vehicle or trailer, the machine must be secured against
tilting and rolling away. To do so, securely lash the machine on both sides at the
front
Fig. 23-A
, at the side
Fig. 23-B
(without side collision protection),
Fig. 23-C
(with side collision protection)
and at the rear
with tension
straps.
Attention
• When loading and subsequently transporting the machine to the
work site, the squeegee and brush head must be raised. Fresh
and waste water tank must be empty!
• Risk of skidding! Drive very carefully and, if possible, only on dry
ramps.
• To load the machine, reverse it up the ramp at idle speed
(maximum slope 16 %).
Fig. 23:
A
D
D
B
C
