HAKO Scrubmaster B260 R Скачать руководство пользователя страница 69

Страница: 69 / 106

05-7182-01.fm

Maintenance and Servicing

5.2.2

Charge the battery

Warning

Risk of explosion! Explosive gases can develop when charging the

battery.

• Avoid smoking and naked flames in the vicinity of batteries.

• Swivel up the seat console all the way before charging the

battery.

The seat console must remain open when charging the battery!

• Ensure that there is sufficient ventilation when charging the battery.

• Only connect and disconnect the battery plug when the charger and

the machine are turned off!

• Do not place the battery plug on the battery during charging!

• Never place tools or other electrically conductive objects on the

battery!

Attention

• Before initially starting up the machine, the battery that is used

must be fully and properly charged with commissioning charge.

Please observe the instruction manual of the charging device and

the instruction manual of the battery manufacturer. Hako

assumes no liability for battery damage resulting from insufficient

commissioning charge.

• Never leave batteries discharged, always recharge them

immediately.

• If possible, charge the batteries fully to ensure that the batteries

have an optimum service life. The charger is designed as a

continuous charger and retains the charging state of the battery

(trickle charge) after completing the charging process.

• The battery should always be charged without being interrupted.

• During the charging process it is not possible to turn on the

machine.

• Observe the information in the instruction manual of the charger

and of the battery manufacturer!

Содержание Scrubmaster B260 R











































































































Результаты поиска

Содержание Scrubmaster B260 R

Отзывы:

Похожие инструкции для Scrubmaster B260 R

Бренды по названию

Популярные бренды

HAKO Scrubmaster B260 R, Руководство по эксплуатации

Результаты поиска

Содержание Scrubmaster B260 R

Отзывы:

Похожие инструкции для Scrubmaster B260 R

Бренды по названию

Популярные бренды