HAKO Scrubmaster B175 R, Руководство по эксплуатации, Страница: 76 / 102

76
05-7180-00.fm
Maintenance and Servicing
Assembly is in reverse order.
5.3.5 Battery plug coding
When using other batteries which have been approved by Hako, the plugs
must be re-coded.
The plug connectors between the battery
Fig. 27-A , the machine Fig. 27-B
and the charger Fig. 27-C are coded with coloured coded pins (yellow, grey or
green) Fig. 27-D depending on the type of battery and rated voltage.
The following three prerequisites must be met for the whole system:
• Voltage coding (36 V) must be identical for all plugs and bushes.
• The colour of the coded pin in the connector housing of the machine is
always yellow.
• The colour of the coded pin in the charger plug (machines without built-in
charger) and in the bush housing of the battery must be identical:
• Grey for wet batteries
• Green for maintenance-free gel batteries
Note
Please ensure that the trough battery is in the correct installation
position! See connecting diagram
Fig. 26-C.
Warning
Risk of short circuit! The coding of the plugs should only be carried
out by a workshop authorised by Hako!
Fig. 27:
36 V
B
D
A
C