HAKO Scrubmaster B175 R Скачать руководство пользователя страница 49

Страница: 49 / 102

03-7180-00.fm

Operation

Adjusting the driver’s seat comfort

Sit on the driver’s seat and adjust as follows:

Adjust in longitudinal direction

• Push lever

Fig. 17-A

outwards.

• Move seat forwards or backwards.
• Release lever

Fig. 17-A

and let the driver's seat engage.

Adjusting the tilt of the backrest

Adjust the tilt of the backrest by turning the handwheel

Fig. 17-B

Adjusting the tilt of the armrests

Adjust the tilt of the armrests by turning the wheel

Fig. 17-D

The armrests can be folded up when not in use.

Adjusting the seat suspension

The seat suspension can be continuously adjusted to the weight of the driver
(50–120 kg) by turning the handwheel

Fig. 17-C

• Drivers who weigh less turn the handwheel

Fig. 17-C

to the left.

• Drivers who weigh more turn the handwheel to the right.

Fig. 17:

Содержание Scrubmaster B175 R







































































































Результаты поиска

Содержание Scrubmaster B175 R

Отзывы:

HAKO Scrubmaster B175 R, Руководство по эксплуатации, Страница: 49 / 102

Результаты поиска

Содержание Scrubmaster B175 R

Отзывы: