HAKO Scrubmaster B175 R, Руководство по эксплуатации, Страница: 73 / 102

05-7180-00.fm
73
Maintenance and Servicing
Charging the battery with a stationary charger
Charge the batteries with a stationary charger as, for example, shown in
Fig. 24-A . The batteries can be charged if the battery capacity is less than
60 %.
1. Place the machine on a level surface and turn it off.
2. Disconnect the battery plug
Fig. 24-B from the machine plug Fig. 24-C .
3. Connect the battery plug to the plug of the charger Fig. 24-D .
4. Switch on the charger.
5. The progress of the charging process is displayed in the display
Fig. 24-E
of the charger. The charge control indicator in the MFD of the machine is
not active during charging with the stationary charger!
6. Once the battery is fully charged, terminate the charging process:
• Switch off the charger.
• Disconnect the battery plug from the plug of the charger and reconnect it
to the plug of the machine Fig. 24-C .
Attention
Observe the information in the instruction manual of the charger
manufacturer!
Fig. 24:
A E D
B C