O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note:
When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note:
When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note:
When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note:
When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
Содержание Hakomatic B910 (7744)
Страница 1: ...Instruction Manual Hakomatic B910 7744...
