HAKO 7580.32, Инструкция по эксплуатации

Страница: 31 / 100

31
Operation
The basic vehicle can be supplemented
by further components. The order and
spare parts numbers of these compo-
nents are in brackets.
• Working lights

(Fig. 14/1) (7584.02)

Area of use: To enable use of the ve-
hicle even in badly lit areas.
• Cab safety roof

(Fig. 14/2) (7582)

Area of use: To protect the driver,
e.g. from parts which could fall from
high rack warehouses.
Pay attention that assembly of
a cab safety roof is made com-
pulsory when the vehicle is op-
erated in such risk areas.
• Flashing beacon

(Fig. 14/3)

(7585.02 Assembly on cab safety
roof)

(7585.10 Assembly on pole / without
cab safety roof)

Area of use: To improve awareness
of the vehicle when in use.
• Spraying/Vacuuming tool

(Fig. 14/4)

Area of use: For manual cleaning of
areas which are difficult to access
with spraying and vacuuming tools.

A holder can be installed on the left-
hand side of the vehicle to fix the
vacuuming tool. Two holes are al-
ready drilled in the left-hand side of
the vehicle for this. The correspond-
ing switch is provided on the right-
hand operating panel to operate the
vacuuming tool.

The following belong to the spraying-
vacuuming tool:
-
Floor scrubbing and vacuuming
tool
(7009)
- Suction and spraying hose
(7766)
- Tool holder and attachment
parts
(7311.10)
• Hand-held vacuum cleaner

(Fig. 14/4)

Area of use: For vacuuming up water
manually in areas which are difficult
to access.

The hand-held vacuum cleaner can
be fixed to the tool holder (refer to
spraying-vacuuming tool).

The hand-held vacuum cleaner con-
tains the:
-
Adapter to connect the following
tools (7893)
- Flexible plastic extension hose ,
length: 3 m (7880)
- Suction pipe (for connection to the
plastic extension hose), length:
1.3 m (7881)
- Suction nozzle with rubber lips
(7883)