Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
Lifting the table
WARNING:
1. DO NOT overload the lift table, stay within its rated capacity.
2. DO NOT side or end load, load must be distributed on at least 80% of table area.
-
Press the lifting pedal several times until the table reaches the desired position.
-
The table does not elevate after reaching the highest position even if the lifting pedal is
pressed.
-
The table lowers slightly after reaching the highest position.
NOTE:
The hydraulic cylinder is designed to hold the table. As is the nature of the hydraulic
system, table lowers very slowly over an extended period of time. Please note the table does not
stay at the same position indefinitely.
Lowering the table
WARNING:
DO NOT put foot, hand or any other part of the body in the scissors mechanism.
-
Pull down the lowering lever and the table lowers.
