Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
Owner/Operator must read and understand this instruction manual before using the
product. Incorrect use may lead to accidents. To be used only by competent personnel.
Retain this manual for future reference.
NOTE:
On this manual, WARNING means the danger which can lead to death or serious injury.
CAUTION means the danger which can lead to slight injury or property damage.
1. WARNING
•
DO NOT put foot, hand or any other part of the body in the scissors mechanism.
•
DO NOT allow other person to stand in front of or behind the lift table when it is moving.
•
DO NOT move the lift table when it is in raised position. Load could fall down.
•
DO NOT enter under the table.
•
DO NOT overload the lift table.
•
DO NOT put foot in front of rolling wheels. Injury could result.
•
WATCH difference and hardness of the floor level when moving the lift table. Load could
fall down.
•
DO NOT use the lift table on slope or inclined surface, lift table may become uncontrollable
and create danger.
•
DO NOT lift people. People could fall down and suffer severe injury.
2. CAUTION
•
Read this instruction manual carefully and understand completely how to operate the lift
table. Improper operation could create danger.
•
This lift table is a movable lifter designed to lift or lower a rated load on the table. DO NOT
use the lift table for other purpose than its intended use.
•
DO NOT allow a person to operate the lift table who does not understand its operation.
•
DO NOT lower the table too fast. Load could fall down and create danger.
•
KEEP watching the condition of the load. Stop operating the lift table if the load becomes
unstable.
•
Set the brakes on (of the lift table) when not moving it in order to prevent sudden
movement.
•
DO NOT side or end load the lift table. Load must be distributed on at least 80% of the
table area.
•
DO NOT use the lift table with unstable, unbalanced loosely stacked load.
•
Practice maintenance work according to the service instructions.
•
DO NOT modify the
lift table without manufacturer’s written consent.
•
REMOVE load from the table and use safety stoppers to prevent the table from lowering
when servicing or inspecting the lift table.
•
This lift table is not designed to be water resistant. Use the lift table under dry condition.
