Hakko Electronics Monitouch V7, Технические характеристики, Страница: 109 / 128

6-26 2. Main Menu Screen
4. SRAM/Clock
•
To use the built-in clock of the V7 series or to use the SRAM memory or cassette, it is necessary to
select [SRAM/Clock Setting] from the [System Setting] menu and make the SRAM/clock setting.
For the setting procedure, refer to the Reference Manual.
•
Be sure to set the battery when using the built-in clock of the V7 series or the SRAM memory or
cassette. Without battery, the contents in the SRAM or clock data will not be retained.
When the battery is not connected, the message “Battery not set” is displayed and the
[SRAM/Clock] switch flashes on the Main Menu screen. Connect the battery immediately.
When the battery is to be replaced, the message “Brownout Battery” is displayed.
•
When the [SRAM/Clock] switch on the Main Menu screen is pressed, the following “SRAM/Clock
Adjustment” screen appears.
This screen is used for adjusting the built-in calendar and for initializing the SRAM area.
2002-4 -1
SYSTEM PROG. VER. 1.000
CPU Port
Editor:MJ1
Main Menu V 7 1 0 i T D
System Information
PLC Type : MITSUBISHIQnH(Q) series CPU
Comment :
Screen Data
Information
Size : 5111808
Ethernet
Card
Menu
I/O Test
Ethernet Information
Trans.Speed : 10BASE-T
PORT : 10000
MAC : 0050FF000035
Battery not set
SRAM/Clock
RGB
Adjustment
Extension
FONT
VER.1.300 / 1.000 / 1.000
ENGLISH
PLC Stat. No. : 0
Send Delay : 20msec
Retry : 3
Multi-Link2
Own Stat. No. : 1
Total : 2
Retry : 10
Baud Rate : 115200
07:23:30
I/F DRV VER.1.240
MELSEC QnH Q
Error : Stop
Time-Out : 1.00 sec
Connection : Multi-Link
Signal Level : RS232C
Baud Rate : 19200
Data Length : 8
Stop Bit : 1
Parity : Odd
Stat.No. : 192.168.1.68
[SRAM/Clock] switch
Indicates the message, such as
“Battery not set” or “Brownout Battery.”
SRAM/Clock Adjustment
Main Menu
Date:
Time:
F o r m a t o f S R A M
D a t e a n d T i m e A d j u s t m e n t
S e t
Built-in
Format Execute
2002-2-19 18 : 3 : 44
2002
17 18 0
2 19
Formats SRAM in the present screen data type.
Format Completed
: :
V7EM-S mounted: Extension
V7EM-S not mounted: Built-in
The above is displayed.