background image

3

3. WARNINGS, CAUTIONS AND NOTES

When powered, the temperature of the hot air and the nozzle will become extremely hot, reaching 

a maximum temperature of 1120℉ (600℃). Be sure of the following to avoid possible 

burns / fires :

Do not direct the hot air toward personnel or touch the metal parts near

the nozzle.

Do not allow the nozzle to come close to, or touch, flammable materials.

Inform others in the area that the unit is hot and should not be touched.

Turn the power off and allow the unit to cool when changing parts or

storing the HAKKO FR-810B.

The unit is for a counter or workbench use only.

This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in safe way and understand

the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by 

children without

supervision.

To prevent accidents or damage to the HAKKO FR-810B, be sure to observe the following:

Turn the power off when not in use, or left unattended.

Do not strike the handpiece against hard surfaces or otherwise subject it to physical shock.

Be sure the unit is grounded. Always connect power to a grounded receptacle.

Do not modify the unit.

Use only genuine HAKKO replacement parts.

Do not allow the HAKKO FR-810B to become wet, or use it when hands are wet.

Remove the power cord by holding the plug - not the cord.

Be sure the work area is well ventilated.

To avoid damage to the unit, do not turn the power switch OFF until the pump stops automatically by 

cooling down after use and           appears on the display.

Warnings, cautions and notes are placed at critical points in this manual to direct the operator’s 

attention to significant items. They are defined as follows:

CAUTION :

 

Failure to comply with a CAUTION may result in injury to the operator, or damage to the 

items involved. 

WARNING:

 

Failure to comply with a WARNING may result in serious injury or death.

NOTE :

 

A NOTE indicates a procedure or point that is important to the process being described.

WARNING

CAUTION

Содержание FR810-05

























Отзывы:

Похожие инструкции для FR810-05