1. PACKING LIST AND PART NAMES
Please check to make sure that all items
listed below are included in the package.
SMD Rework Station
Instruction Manual
Thank you for purchasing the HAKKO FR-810B SMD Rework Station.
This unit features digital control and display of hot air temperature.
Please read this manual before operating the HAKKO FR-810B.
Keep this manual readily accessible for reference.
①
Pad
The pad absorbs parts.
Nozzle
(not included)
③
Sensor (internal)
This sensor detects the
temperature of the hot air.
②
Vacuum pipe
The pad is mounted on the
tip of the vacuum pipe.
④Vacuum pipe control knob
This knob controls the length
of the vacuum pipe.
⑤Pick-up indicator
The movement of the vacuum pipe can be checked here.
S (START/STOP)
button
V (VACUUM)
button
●
Handpiece
Power cord
HAKKO FR-810B
station
Handpiece
Handpiece holder
handpiece holder
attachment plate
Tapping
screw
HAKKO FR-810B station
Handpiece holder
Pads (ø3 mm (0.12 in.), ø5 mm (0.20 in.), ø7.6 mm (0.3 in.))
Heat resistant pad
Power cord
Vacuum pipe control knob (L) (with tapping screw)
Instruction manual
Temperature distribution chart
1
1
2 each
1
1
1
1
1
Air indicator
Temp/Time indicator
Heat resistant pad
Vacuum pipe
control knob (L)
2 for each pad
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400 Toll
Free 1-800-517-8431
