![background image](http://html1.mh-extra.com/html/hakko-electronics/fr-810/fr-810_instruction-manual_3315136003.webp)
7. TEMPERATURE DISTRIBUTION CHART
F. Auto shutoff time setting
1. Auto shutoff time (30 minutes early) will be displayed if you press the button when is displayed.
2. Press the ( ) button, you can change to the desired value.
The values you can enter is 30 to 60 (minutes).
3. The display will return to if you press the button after selecting.
G. Timer mode selection
1.
Either
or will be displayed if you press the button when is displayed.
2. (
Open Timing
) and (
Closed Timing
) will be switched alternately If you press the
( ) button.
3. The display will return to if you press the button after selecting.
H.
Forced cooling bypass
1. Either
or will be displayed if you press the button when is displayed.
2. and will be switched alternately If you press the ( ) button.
3. The display will return to if you press the button after selecting.
I.
Chain Preset setting
1. Either
or will be displayed if you press the button when is displayed.
2. and will be switched alternately If you press the ( ) button.
3. The display will return to if you press the button after selecting.
1 2 3 4 5 6 7 8 9
Air
HAKKO FR-810 Airflow
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Airflow
(L/min)
Unequipped nozzle
①
N51-04
②
N51-03
③
N51-02
④
N51-01
⑤
N51-05
⑥
①
②
③
④
⑤
⑥
N51-01 Single ø2.5 (0.10)
Temp.
700
℃
(1292℉)
600
℃
(1112℉)
500
℃
(932℉)
400
℃
(752℉)
300
℃
(572℉)
200
℃
(392℉)
100
℃
(212℉)
0
℃
(32℉)
1 2 3 4 5 6 7 8 9
Air
①100℃
②200℃
③300℃
④400℃
⑤500℃
⑥600℃
①
②
③
④
⑤
⑥
Temp.
700
℃
(1292℉)
600
℃
(1112℉)
500
℃
(932℉)
400
℃
(752℉)
300
℃
(572℉)
200
℃
(392℉)
100
℃
(212℉)
0
℃
(32℉)
1 2 3 4 5 6 7 8 9
Air
N51-02 Single ø4.0 (0.16)
①100℃
②200℃
③300℃
④400℃
⑤500℃
⑥600℃
①
②
③
④
⑤
⑥
N51-05 Bent Single 1.5 x 3 (0.06 x 0.12)
①100℃
②200℃
③300℃
④400℃
⑤500℃
⑥600℃
①
②
③
④
⑤
⑥
Temp.
700
℃
(1292℉)
600
℃
(1112℉)
500
℃
(932℉)
400
℃
(752℉)
300
℃
(572℉)
200
℃
(392℉)
100
℃
(212℉)
0
℃
(32℉)
1 2 3 4 5 6 7 8 9
Air
N51-04 Single ø7.0 (0.28)
①100℃
②200℃
③300℃
④400℃
⑤500℃
⑥600℃
①
②
③
④
⑤
⑥
Temp.
700
℃
(1292℉)
600
℃
(1112℉)
500
℃
(932℉)
400
℃
(752℉)
300
℃
(572℉)
200
℃
(392℉)
100
℃
(212℉)
0
℃
(32℉)
1 2 3 4 5 6 7 8 9
Air
N51-03 Single ø5.5 (0.22)
①100℃
②200℃
③300℃
④400℃
⑤500℃
⑥600℃
①
②
③
④
⑤
⑥
Temp.
700
℃
(1292℉)
600
℃
(1112℉)
500
℃
(932℉)
400
℃
(752℉)
300
℃
(572℉)
200
℃
(392℉)
100
℃
(212℉)
0
℃
(32℉)
1 2 3 4 5 6 7 8 9
Air
After changing parameters, press and hold the button down for at least two seconds until is displayed.
At this time, you can switch between and by pressing the ( ) button. Select if you
are finished making changes or if you need to go back and make more changes. Press the button to
confirm you selection.
Changes will not be completed until is displayed and you press the button.
Please note that no changes will be made if you turn off the power while making changes.
E
. Password setting
1. Either
,
or will be displayed if you press the button when is displayed.
2. If you press the ( ) button, (Open), (Partial) and (Restricted) will be
switched alternately.
3. If you press the button after selecting, the display will return to . ※1
、
2
※1 The display will move to the following selection screen if you select (Partial).
4. If you press the button at 3, you will be asked whether or not the password function is needed when
moving to the temperature setting mode.
5. Either (without password) or (with password) will be displayed if you press the ( ) button.
6. If you press the button after selecting, you will be asked whether or not the password function is
needed when moving to the preset selection mode.
7. Either (without password) or (with password) will be displayed if you press the ( ) button.
8. If you press the button after selecting, you will be asked whether or not the password function is
needed when moving to the offset mode.
9. Either (without password) or (with password) will be displayed if you press the ( ) button.
10. If you press the button after selecting, you will be asked whether or not the password function is
needed when moving to the Air flow mode.
11. Either (without password) or (with password) will be displayed if you press the ( ) button.
12. If you press the button after selecting, the display will move to password setting screen.
※2 If you select (Restricted), the display will move to the following password setting screen.
If you select (Partial), the display will move to the following the password setting screen after selecting ※
1
.
11. The hundreds digits in the display will begin to flash. It indicates that you can enter the value.
Press the ( ) button to enter the letter you required.
12. The tens digits in the display will begin to flash if you press the button after entering.
Use the same procedure to enter the letters for tens and units digit.
13. The display will return to if you press the button after entering the units digit.
6. PARAMETER SETTING
CAUTION
●
These charts do not define the temperature characteristics, and are for reference only.
●
The temperature distribution charts for HAKKO 850 or 850B should not be used for FR-810. FR-810 uses a different pump and control system.
When you use the FR-810, make sure to refer to the temperature distribution charts shown to the under.
●
The hot air temperature may not reach the set temperature depending upon the combination of the nozzle and the set air flow.
In this case,
reduce the set temperature or the air flow.
●
Test condition: Measured at a point 1mm (0.04 in.) from the nozzle by recorder.