![Hakki Pilke 55 PRO Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/hakki-pilke/55-pro/55-pro_manual_3288509017.webp)
17 / 48
Hakki Pilke 55 Pro
Translation
Version 3-2022
3.2.5.
Using the XL Conveyor out-feed conveyor (accessory)
The Hakki Pilke 50 Pro firewood processor’s out
-feed conveyor belt is driven by a hydraulic motor. To
change the speed of the belt, use adjuster C in Figure 17. Changing the conveyor angle in the lateral
direction is done hydraulically using lever A in Figure 17:
-
Lever forwards: the conveyor turns to the left.
-
Lever backwards: the conveyor turns to the right.
Note! Always ensure that there is nothing in the way of the out-feed conveyor before turning it!
The angle of the out-feed conveyor is adjusted mechanically with the conveyor winch.
Read more about
the use of XL Conveyor in its separate operating manual.
Figure 17.
By using lever B (Figure 17), you can stop the conveyor (middle position) and, if necessary, reverse the
conveyor belt for a short distance (approx. 1 m) by pulling the lever back if a piece of wood is stuck between
the conveyor cleaning grille and the upper roller, for example.