10 / 40
Hakki Pilke 38 Pro
Translation
Version 3
3.1.2.
Placing the out-feed conveyor in the operating or transport position
Place the out-feed conveyor in the operating position as follows:
1.
Ensure that there is
sufficient
room
for
opening
the
out-feed
conveyor.
2.
Turn off the machine.
3.
Keep lock A open and
lower
the
out-feed
conveyor down with a
winch
to
its
lowest
position.
Note! Leave sufficient
clearance
(approx.
30 cm)
for
the
discharge opening of
the conveyor.
4.
Turn the upper section of
the conveyor to the
operating position with
handle C at the upper
end.
5.
Turn
the
out-feed
conveyor's support bar B
to the side.
6.
Straighten
splitting
groove guard E into the
operating position.
7.
Use a winch to lift the
conveyor to the desired
angle (max 40°), and use
lock D on the bottom of
the conveyor to lock the
upper section of the
output conveyor in the
operating position.
Figure 5.
Figure 6.
Figure 7.
Figure 8. Figure 9.
