33 / 40
Hakki Pilke 38 Pro
Translation
Version 3
5.8.
Washing and cleaning
Loose debris and sawdust can be cleaned from the machine with pressurised air, for example. The machine
can also be washed with a pressure washer, as long as the water jet is not aimed directly at the bearings or
electrical equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The machine
must always be cleaned after use. Clean the machine at suitable intervals and always before storing the
machine for a prolonged time. After washing, the machine must be lubricated according to the instructions in
Section 5.5.
6.
Storage
Although the machine is intended for outdoor use, it should be covered and stored in a sheltered location or
indoors. Before prolonged storage, the machine must first be cleaned, then washed according to Section 5.8
and lubricated according to Section 5.5.
7.
Maintenance table
Item
Task
Daily
Interval
100 h
Interval
500 h
Substance/access
ory item
Multiplier gear oil
Check
1st change
Subsequent
X
X
X
SAE 80/90.
0.34 l
Hydraulic oil
Normal conditions
Check
1st change
Subsequent
X
X
X
Amount approx. 65 l
Standard
option:
ISO VG 32
In hot conditions:
ISO VG 46, for
example
Oil filter
Always
when
changing oil
13921107005357
spare part: 97348
All levers
Lubrication
X
Lubrication oil
Saw blade
Sharpen as
necessary
0.325” 68/1.5 mm
spare part: 95668
Saw bar
Maintenance
as
necessary
16” 1.5 mm
spare part:
95147
Machine
Clean
Wash
X
Electric motor
Clean
X
Electrical
equipment
Clean
X
Winch and strap
Check
X
