Haiyang Smart7 Series Скачать руководство пользователя

Страница: 28 / 95

- 28 -

#Fishfinder Mode

1. Normal (200KHz or 50KHz)

Normal mode (with Auto Range active) displays the sounder image with the surface at the top of the

screen and the sea bottom in the lower part of the screen. The depth scale indicates the depth range

appearing in the display. Bottom contours and fish echoes are displayed at the depths where they are

detected. If the depth Range is set manually to a value less than actual water depth, sea bottom

echoes are not displayed, but all other echoes within the Range setting are displayed.

2. Bottom Zoom (200KHz or 50KHz)

Bottom Zoom magnifies the sounder display from the sea bottom toward the surface for a short

distance. The sea bottom contour is displayed and additional contour lines are added at intervals

above the sea bottom to aid in determining distances of echoes near the bottom. Use the Sounder

Menu to set the magnified Bottom Range from 2.5 to 20m (10 to 60ft.). Default setting is 10m (40ft.). If

the depth Range is set manually, the setting must place the sea bottom echo in the lower portion of the

screen for Bottom Zoom to be effective.

3. Bottom Lock (200KHz or 50KHz)

Bottom Lock divides the Fishfinder main screen image for the selected Fishfinder into two sections.

The left hand section displays a Normal Mode image. The right hand section of the screen displays the

Fishfinder image relative to the sea bottom. The sea bottom appears as a straight line with the

Fishfinder image magnified for a short distance toward the surface. A scale

appears on the right for estimating distances of echoes near the bottom. Use the Fishfinder Manu to

set the magnified Bottom range from 2.5 to 20m (10 to 60ft.). Default setting is 10m (40ft.). If the depth

Range is set manually, the setting must place the sea bottom echo in the

lower portion of the screen for Bottom Lock to be effective.

Fishfinder modes are selectable for single frequency or dual and some functions, for example bottom

zoom or lock.

Содержание Smart7 Series
































































































Результаты поиска

Содержание Smart7 Series

Отзывы:

Похожие инструкции для Smart7 Series

Бренды по названию

Популярные бренды

Haiyang Smart7 Series, Руководство пользователя

Результаты поиска

Содержание Smart7 Series

Отзывы:

Похожие инструкции для Smart7 Series

Бренды по названию

Популярные бренды