TOPlus mini / TOPlus premium pull-back
Removal
Order h49 7144.907-333
95
10.2 Preparing the machine for removal
1. Set the machine into set-up mode.
INFORMATION
The minimum operating pressure is reached when the
drawtube can still just be moved without triggering an
error message.
2. Reduce the operating pressure to a minimum.
3. Remove cutting tools and/or sharp objects from the
working area of the machine, or cover them.
4. Remove operating and auxiliary materials as well as re-
maining processing materials and dispose of them in an
environmentally responsible manner.
10.3 Removal of the changing parts
A
Changing part variant direct screw connection
B
Changing part variant x-times axial screw connection
B1 Fixing screws changing part variant x-times axial screw connec-
tion
C
Changing part variant x-times axial screw connection bayonet
C1 Fixing screws changing part variant x-times axial screw connec-
tion bayonet
D
Changing part variant central axial screw connection
D1 Fixing screw changing part variant central axial screw connection
E
Changing part variant radially clamped
E1 Clamping screw changing part variant radially clamped
Depending on the version of changing parts, they can be re-
moved as follows.
If necessary, in addition to these operating instruc-
tions, you should also read and follow the operating
instructions for the relevant changing parts.
