MANDO Adapt T812
Installation
40
Order h49 7144.907-333
Thread designa-
tion
Tightening torque at screw quality
[Nm]
10.9
12.9
M10
50
70
M12
100
130
M16
220
300
M20
400
550
M24
600
800
Table 5:
Screw tightening torques, metric control threads
Aluminum components
The following table contains the reduced screw tightening
torques for securing aluminum components.
Thread designa-
tion
Tightening torque
[Nm]
Minimum screw
depth [mm]
M6
10
12
M8
23
16
M10
46
20
Table 6:
Screw tightening torques for aluminum components
7.4 Preparation of the machine for installation
1. Set the machine into set-up mode.
2. Reduce the operating pressure to a minimum.
3. Remove cutting tools and/or sharp objects from the
working area of the machine, or cover them.
7.5 Preparation of the basic clamping device
To install the adaptation clamping device, the basic clamping
device must be prepared.
In addition to these operating instructions, you should
also read and follow the operating instructions for the
associated basic clamping device.
1. Remove the clamping element from the basic clamping
device [see operating instructions for the basic clamping
device].
INFORMATION
Before installation of the adaptation clamping device,
the base end-stop must be removed from the basic
clamping device.