background image

Safety

For safe operation of the service lift to -35°C, the following safety devices and safety features

are required. Only with faultlessly functioning components and features can safety be guaran-

teed.
Should you have any questions, please feel free to contact us at Hailo Wind Systems.

The switch cabinet is equipped with its own heater. This ensures that the components in the switch

cabinet also function reliably at lower temperatures. The temperature in the switch cabinet must

lie above -15°C, otherwise the controls are not enabled and the service lift is not operational.

The switch cabinet heater raises the temperature up to +10°C and then automatically shuts off.
The switch cabinet heater is constantly in operation at temperatures below +10°C. The heater

remains activated even with the main switch turned off.

DANGER!
Danger of electrical shock!
The switch cabinet heater is also activated with the main switch turned off.

Many areas of the control unit continue to carry voltage even with the main

switch turned off. Never perform work on the control unit if it is under voltage.

Switch the voltage supply to the service lift off if necessary.

A temperature sensor is located in the switch cabinet. If the temperature in the switch cabinet lies

under -15°C, the controls are not enabled and the service lift cannot be operated.

The arrester device is equipped with a heating mat [1] on the back of the casing. An insulating

mat is adhered to this. When necessary, the heating mat heats up the arrester device to the

operating temperature.

Installed in the arrester device is a temperature sensor, which forwards the temperature to the

control unit. As long as the temperature in the arrester device is below -15°C, the controls are

not enabled and the lift cannot be moved.

CAUTION!
The arrester device is equipped with a heating mat. Do not remove the insula-

tion on the back of the arrester device: The surface of the heating mat can

reach a temperature of 60°C!

Safety instructions

Switch cabinet heater

Temperature measurement in the switch cabinet

Heater of the arrester device

Temperature measurement of arrester device

Safety

• TOPlift CCV •

 

7

Содержание TOPlift CCV
















Отзывы: