Hailo TOPlift CCV, Руководство пользователя

Страница: 12 / 15

Use the cleaning and lubricating agents which have been approved by the manufacturer of
the system.
The result of the inspection and maintenance must be documented in the inspection and mainte-
nance report.
Abnormalities, defects or other noticed problems are to be listed in the respective inspection and
maintenance report with the name of the component.
DANGER!
Danger of fatal electrical shock!
Contact with voltage-conducting components of the machine poses a danger of
death due to electrical shock.
– Only specially trained, qualified personnel are allowed to perform work
on the electrical circuitry of the machine.
– For all work on the machine’s electrical circuitry, turn off the main switch
and secure it with a padlock against being switched on again.
DANGER!
Caution, danger of falling!
If you are not secured with your personal protective equipment, you could fall!
– Always secure yourself in a suitable manner against falls by employing
your personal protective equipment (PPE).
WARNING!
Maintenance work!
For maintenance and repair work performed on the electrical system, the entire
machine must be switched free of current on the lowest level by means of the
main switch on the switch cabinet or with the main switch in the cabin.
The main switch on the switch cabinet (and in the cabin, if applicable) are
secured with a padlock.
Electrician
Electricians have the professional training which enables them to perform work on electrical
installations.
Qualified person
A qualified person is someone who, due to their professional training and experience, current
professional activities as well as completion of a separate manufacturer training, has the neces-
sary specialist expertise to inspect equipment and who has been authorised and certified by the
manufacturer.
Procedures for inspection and maintenance
n
Check the closure force of the screw connections for all system components by random sam-
pling.
If a loose screw connection is found on a system component, all connection screws on this
component must be tightened or, if needed, replaced.
n
Check rollers and roller bearings on the system components for sluggishness and damage.
Damaged or worn bearings must be replaced.
Maintenance
• TOPlift CCV • 12