Haier N-Series Скачать руководство пользователя

Страница: 23 / 62

Functions and Control

Domestic air conditioner

controlled by the thermostat. The outdoor system can be restarted when the coil temperature is below 42

and the system has been stopped for 3 minutes. The malfunction will be stored in the malfunction resume

and will not be revealed.

7.1.13 Abnormal operation of indoor system

When the outdoor system operates, if the indoor system operation differs from the outdoor system, the

abnormal operation malfunction will be reported. 10s after the report, the indoor system will be closed.

Outdoor system mode

Indoor system mode

conflicts

cooling

heating

yes

cooling

airflow

heating

airflow

yes

heating

cooling

yes

7.1.14 Malfunction list resume.

Nothing is presented if there is no code list.

The malfunction display will automatically finish in 10 seconds.

The remote control only receives the signals for stop. According to the signals, the malfunction resume

presentation finishes.

The resume restores after the power supply restores.

7.1.15 Abnormality confirmation approaches

1. indoor temperature sensor abnormality:

Under the operation, the normal temperature ranges from 120 degree to -30 degree. When the temperature

goes beyond this range, the abnormality can be confirmed. If the temperature goes back into the range, the

system will automatically resume.

2 .indoor heat interaction sensor abnormality:

Under the operation, the normal temperature ranges from 120 degree to -30 degree. When the temperature

goes beyond this range, the abnormality can be confirmed. If the temperature goes back into the range, the

system will automatically resume.

3 .indoor malfunction:

Outdoor malfunction: When the indoor system receives the outdoor malfunction codes, it will store the code

into E2 for the malfunction list resume. The indoor system will continue to operate according to the original

status, the malfunction code will not be revealed or processed.

4. transmission abnormality:

If the indoor system can’t receive the outdoor system for 8 minutes, the communication abnormality can be

confirmed and reported and the outdoor system will be stopped.

7.1.16 Single indoor system operation

* Enter condition: First, set the high speed airflow and 30 centigrade set temperature, then press the dormant

Содержание N-Series































































Результаты поиска

Содержание N-Series

Отзывы:

Похожие инструкции для N-Series

Бренды по названию

Популярные бренды

Haier N-Series, Руководство по обслуживанию

Результаты поиска

Содержание N-Series

Отзывы:

Похожие инструкции для N-Series

Бренды по названию

Популярные бренды